Metal structure, high strength, beautiful appearance.
◆ Removable and easy to move.
Suitable for drying and insecticidal effects on various coniferous and broad-leaved materials.
The box size is for reference only and can be designed separately according to user needs.
◆ One furnace with two boxes or a large box can be designed according to user needs.
Due to continuous improvement of technology, parameter changes are subject to actual conditions.
Introduction to Heat Sources for Wood Drying Series Equipment
 & nbsp;& nbsp;& nbsp; Wood drying heat source, the internal heat exchange tube system adopts high-tech materials, so that the key parts of the equipment's heat exchange tubes are in a hot melt state at high temperatures, and the refractory material does not fall off, effectively solving the problem of thermal expansion, thereby extending the service life of the heat exchange tubes and achieving a heat exchange efficiency of over 76% for the equipment; At the same time, the steam generation device inside the equipment can generate sufficient steam to dry the wood, which, in conjunction with our factory's drying process, enables the wood to achieve a short drying cycle and defects.
working principle:
 & nbsp;& nbsp;& nbsp; Wood hot air (steam) drying equipment can dry various tree species, specifications, and uses of wood. It has the advantages of energy saving, safety and reliability, short drying cycle, good drying quality, and low drying cost. It is widely used in large, medium, and small wood processing enterprises, especially for manufacturers engaged in wood product export business. HXM series wood drying equipment, during normal operation, the fuel is fully burned in the combustion chamber, generating heat energy, which is fully absorbed by the drying medium in the heat energy drying system, producing a temperature of about 180 degrees Celsius. Under the action of the circulating fan, the high-temperature airflow is transported to the drying chamber through the control system and conveying system to dry the wood. At the same time, the steam generation device on the equipment can produce a large amount of atmospheric steam. According to the requirements of the drying process, the steam can be timely sent into the drying chamber to spray steam and adjust the humidity of the wood. The humidity control system is an independent steam system equipped with safety devices. Saturated wet steam can quickly make the surface temperature and internal humidity of wood consistent, thereby achieving the goal of drying both the inside and outside of the wood simultaneously. For solid, heavy, hard, and thick wood, intermittent heating drying technology can be used to solve defects such as internal cracking, end cracking, and deformation that occur during the drying process, greatly improving the yield of wood products. The wood drying equipment is equipped with a heat recovery system, which significantly reduces the drying cost and shortens the drying cycle. When the moisture content of wood drops below 15%, after 6-8 hours of high-temperature dry steaming, all parasitic insects and their eggs inside the wood can be eliminated, solving the adverse effects caused by insects and improving the economic efficiency of the enterprise.
control device
 & nbsp;& nbsp;& nbsp; The inlet and return air ducts of the equipment are equipped with adjustable valves, which can adjust the inlet and rotary air volume at any time according to the drying process requirements of the wood. There is also an adjustable compensation at the inlet of the fan, which can be used to adjust the air pressure and volume in the drying room. A steam spray regulating valve is installed on the main body of the equipment to adjust the steam spray amount according to the different needs of wood drying. There is also a combustion assisting device at the lower part of the equipment body, which is used when the fuel is not easy to burn due to various reasons. You can open the combustion valve to increase the combustion intensity and reach the temperature required for each drying stage.
Main features of the product:
 & nbsp;& nbsp;& nbsp; 1. It is made using a rotary heating device, consisting of a combustion chamber, a thermal energy conversion chamber, a steam generation device, a combustion supporting device, a fan, a water mist desulfurization and dust removal device, a chimney, and other parts. Energy saving and high thermal energy conversion rate.
 & nbsp;& nbsp;& nbsp; 2. The fuel required for combustion includes shavings, sawdust, wood scraps, coal, etc.
 & nbsp;& nbsp;& nbsp; 3. Adopt a functional steam generation device to ensure sufficient steam supply to the drying kiln. In the early stage of drying, due to the large amount of steam entering the room, increase the indoor humidity to prevent wood deformation and cracking.
 & nbsp;& nbsp;& nbsp; 4. Dried wood has a short drying cycle, low cost, uniform drying, and good effect, which solves the defects such as internal cracking, fracture, surface cracking, deformation, and discoloration that occur during the wood drying process.
 & nbsp;& nbsp;& nbsp; 5. It can be designed as one furnace with two drying rooms to facilitate rotating operations according to requirements.
 & nbsp;& nbsp;& nbsp; 6. Technological transformation can be carried out in combination with existing soil kilns to save equipment investment.
 & nbsp;& nbsp;& nbsp; 7. The overall equipment is easy to operate, safe and reliable.
 & nbsp;& nbsp;& nbsp; 8. This equipment is suitable for drying various types of wood and is an ideal replacement for furniture factories, wood product factories, traditional drying kilns, and old drying equipment.